XTR Flexi Plate with Textured ULTEM PEI - Bambu Lab H2D - 355 x 325 mm

Fits: Bambu Lab H2D (355 x 325 mm build platform).

Upgrade your 3D printer bed with the Wham Bam eXTReme (XTR) Flexi Plate coated with Double-Sided Textured ULTEM™ PEI. Built to withstand high peel forces and warp-prone engineering filaments, this plate gives your 3D prints a textured, professional finish on the bottom layer.

Key Features & Benefits

• Double-Sided Textured ULTEM™ PEI: Electrostatically powder-painted with authentic Sabic ULTEM™ PEI and kiln-baked for maximum coating longevity and superior first-layer grip.
• Heavy-Duty 0.6 mm Spring Steel Core: Upgraded, high-chromium spring steel core provides exceptional resistance against peeling, bending, and warping forces during edge-to-edge or high-shrinkage prints.
• Wide Filament Compatibility: Excellent native adhesion for PLA, TPU, PETG, and ABS. Advanced materials like Nylon can be printed using glue stick or Magigoo as an adhesion promoter.
• Broad Sensor Compatibility: Operates seamlessly with eddy current mesh, optical, touch, inductive, capacitive, and Cartographer bed-leveling sensors.

Includes

• 1x Double-Sided Powder-Painted ULTEM™ PEI XTR Flexi Plate (0.6 mm steel core + 0.12 mm PEI coating per side) — 355 x 325 mm

Note: Requires an existing magnetic base or bed clips installed on your printer to secure the Flexi Plate.

Use & Maintenance

• Routine Cleaning: Wipe down the build surface with Isopropyl Alcohol (>90% IPA) and a fresh paper towel before and after every print. Avoid using acetone, as it will damage the PEI surface.
• Deep Cleaning & Maintenance: If adhesion decreases over time, wash the surface with warm water and dish soap or vinegar to strip built-up oils. To revitalize the finish, lightly pass over the surface with 600-grit wet/dry sandpaper, then wipe clean with IPA.
• Part Removal: Flex the spring steel plate slightly after printing to easily pop prints off. For small stuck bits (e.g., purge lines), carefully use a spatula with rounded edges.

Confirmed Printer Compatibility

Bambu Lab H2D and other 355 x 325 mm build platforms.