Mega Slap Mat® - 100% Silicone Crafting & Resin Work Surface
Mega Slap Mat® - 100% Silicone Crafting & Resin Work Surface
The Wham Bam Systems Mega Slap Mat® is a heavy-duty, 100% first-grade silicone surface designed to protect your workspace from 3D printing resins, harsh chemicals, paints, and glues. Thicker and more durable than standard silicone mats, its rigid structure makes transporting messy projects easier while providing superior heat and chemical resistance.
It also serves as an excellent heat-resistant electronics workstation mat, withstanding direct contact from melted solder and soldering iron tips for up to 3 minutes.
Key Features
- Premium First-Grade Silicone: Thicker and stiffer construction than budget alternatives for easier handling and long-lasting durability.
- Resin & Chemical Resistant: Impervious to 3D printer resins, body putty, paints, and common adhesives.
- High Temperature Protection: Resists melted solder and direct soldering iron contact up to 3 minutes.
- Spill Protection: Features a raised outer lip to contain liquid spills and resin runs.
Product Specifications
- Dimensions: 345 mm x 700 mm (13.6 in x 25.5 in)
- Thickness: 2 mm center surface with a 4 mm raised border lip
Usage & Resin Clean Up Instructions
- Put on proper safety gear (nitrile gloves and a mask/respirator) before handling uncured resin.
- Using both hands, carefully move the mat into direct sunlight (or under a UV lamp).
- Allow the leftover resin to fully cure and harden.
- Flex the silicone mat gently to pop the hardened resin right off.
- Wipe away any residual spots using Isopropyl Alcohol (IPA) and a paper towel.
Note: Dried glues and epoxies can also be flexed off or cleaned with IPA.
Advisory Note: Avoid using baking soda as a glue accelerator directly on the Slap Mat®, as this chemical reaction can degrade silicone over time. If using accelerators, place a protective barrier or wax layer on top of the mat.
