Polymaker - PolySupport - 3D Printer Filament for Support Material for PLA 750g 1.75mm

PolySupport™ is a dedicated break-away support material specifically engineered for use with Polymaker PLA-based filaments. It creates a stable, high-quality interface during the printing process but remains weak enough to be easily removed by hand, leaving a clean surface finish on your model without the need for water or chemicals.

Seamless Post-Processing: PolySupport™ is the perfect solution for complex geometries. It provides enough structural integrity to support steep overhangs and bridges, yet snaps away cleanly, drastically reducing the time spent on post-print cleanup.

Why Use PolySupport™?

• Perfect PLA Interface: Specifically formulated to bond just enough to PLA for support, but not enough to fuse permanently.
• Tool-Free Removal: Designed to be broken away by hand in seconds, even in hard-to-reach areas.
• Increased Productivity: Eliminate the long drying times associated with PVA or the chemical baths required for soluble supports.

Recommended Print Settings

Attribute	Recommended Value
Printing Temperature	220°C – 230°C
Bed Temperature	25°C – 60°C
Printing Speed	20mm/s – 40mm/s
Cooling Fan	ON

Retraction Settings

• Direct Drive: 1mm Distance | 20mm/s Speed
• Indirect (Bowden) Drive: 3mm Distance | 40mm/s Speed

Technical & Spool Specifications

• Density: 1.22g/cm³
• Spool Size: 0.75kg Net Weight
• Outer Diameter: 200 ± 1mm
• Inner Hole Diameter: 55 ± 1mm
• Width: 50.6 ± 2mm
• Spool Weight: 125 ± 7g

Pro-Tip: For the cleanest interface, ensure your "Support Roof" settings in your slicer are optimized for break-away materials.