PolyLite™ ABS is engineered using a specialty bulk-polymerized resin, resulting in a significantly lower volatile content compared to traditional ABS filaments. This advanced formulation delivers exceptional print quality with minimal odor during the printing process, making it a more pleasant option for professional workspaces.
Hardware Note: For optimal results and dimensional stability, an enclosed 3D printer is highly recommended to maintain a stable thermal environment and prevent warping.
Choosing the Right Setup
Success with ABS often depends on the size of your model and your printer's environment:
Small Prints (< fist size): Can be printed on non-enclosed machines with a 90°C bed.
Medium Prints (15cm+): Requires an enclosed 3D printer (internal temp 40-50°C).
Large Industrial Prints: Requires an actively heated chamber (internal temp 70°C+).
Recommended Print Settings
Attribute
Value
Printing Temperature
245°C – 265°C
Bed Temperature
90°C – 100°C
Printing Speed
30mm/s – 50mm/s
Cooling Fan
OFF
Drying Settings
70°C for 6 hours (highly recommended)
Post-Processing & Hardware
Acetone Smoothing: Fully compatible with acetone vapor for a high-gloss, glass-like finish.
