Flexi Plate with PEX Build Surface - 330 x 330 mm
Flexi Plate with PEX Build Surface - 330 x 330 mm
Upgrade your 3D printing build surface with the Wham Bam Flexi Plate with PEX Build Surface (330 x 330 mm). Specially engineered to improve print quality and simplify part removal, this system provides exceptional adhesion during printing and effortless pop-off release once cooled—preventing damage to delicate 3D prints.
Constructed from high-grade, rust-proof spring steel paired with Wham Bam's specially formulated PEX layer, this flexible build plate is built to maintain its original flat shape and tension over long-term use across hobbyist, prosumer, and industrial settings.
Note: A magnetic base or bed clips are required on your printer to secure the Flexi Plate.
Key Features & Specifications
- Dimensions: 330 x 330 mm
- Build Surface Thickness: PEX Build Surface (0.35 mm)
- Flexi Plate Thickness: High-chromium spring steel (0.4 mm)
- Sensor Compatibility: Eddy current mesh, Optical, Touch, Inductive, Capacitive, and Cartographer sensors
- Includes: 1 x Wham Bam Flexi Plate with pre-applied PEX Build Surface
Confirmed Printer Compatibility
Fits (330 x 330 mm bed size):
- QIDI TECH: X-Max 3
- Elegoo: Neptune 3 Plus, Neptune 4 Plus
- Geeetech: A30
- Tronxy: X3S, X5S, X5SA Pro
May Also Fit: Raise3D Pro 2, Raise3D Pro 2 Plus.
Usage & Maintenance Guidelines
Surface Preparation (PEX Prep): Prior to first use, scuff the PEX surface in circular motions for 4–5 minutes using 000 steel wool or a red abrasive pad until an even satin matte finish is achieved. Clean thoroughly with >90% isopropyl alcohol (IPA) and a fresh paper towel (avoid shop rags or microfiber towels).
Filament Settings & Tips: Set your first 3 hot-end layers toward the lower end of your filament's temperature range to protect the PEX. When printing materials with strong adhesion like PETG or ASA, always apply a thin layer of glue stick as a protective barrier.
Part Removal & Best Practices: Always allow both the print bed and part to cool completely before flexing. Never force warm parts off the plate. After every print, scuff lightly for 10 seconds and wipe clean with IPA to prevent oil and contaminant buildup.
Downloads & Resources
