Cookiecad - Unicorn Elixir Tri-Color Gradient (pink → purple → blue) PLA Filament 1.75mm, 1kg

Bring the ultimate fantasy aesthetic straight to your print bed. Cookiecad Unicorn Elixir PLA takes a magical, slowly transitioning gradient and supercharges it with premium multi-dimensional effects. This enchanting specialty spool cycles gracefully through three stunning pastel shades—soft pink, cosmic purple, and pale blue—while a dense infusion of premium shimmer particles and a shifting iridescent blue-green tint bathe your finished parts in a breathtaking, pearlescent luster.

Master Your Elixir Gradients

Because the color shift occurs gradually across the length of the strand, you can use your slicing setup to control exactly how this mythical spectrum reveals itself on your models:

• Small Objects: Will print in a single, rich shimmering tone—allowing you to harvest completely different looking colored parts out of the exact same roll.
• Large Objects: Will showcase a beautiful, seamless color cycle transitioning elegantly from pink, to purple, to blue, and back again.
• Pro-Tip for Dynamic Fades: Want to capture the full Unicorn spectrum on smaller decorative items? Try printing multiple models simultaneously, scaling up your object size, or increasing your infill density to pull more filament through the nozzle within a single layer height.

The Iridescent Shimmer Advantage

• Flawless Layer Masking: The heavy blend of embedded shimmer particles breaks up surface light reflections, masterfully camouflaging standard layer lines and minor print artifacts right off the build plate.
• High-Gloss Pearl Finish: Features a high-sheen, wet-look glossy base that accentuates crisp geometries, dramatic curves, and organic figurines with an upscale, premium finish.
• Legendary PLA Reliability: Offers the absolute user-friendliness that makes PLA the industry standard—boasting ultra-low thermal shrinkage, excellent bed adhesion, and virtually zero corner warping.

General Printing & Optimization Guidelines

• Nozzle/Extruder Temperature: 190°C – 220°C (Fine-tuning within this range lets you perfectly balance smooth flow with maximum iridescence and gloss).
• Heated Bed Temperature: 50°C – 60°C (Can also be printed on an unheated build surface treated with clean blue painter's tape or a quality bed adhesive).
• Part Cooling Fan: ON / High Speed (Essential for achieving pristine top layer fills, clean bridging paths, and sharp overhang structures).

Ideal for printing mythical creatures, whimsical holiday decorations, custom cosplay armor pieces, jewelry boxes, and high-impact display models that deserve to look spectacular from every angle.