Cookiecad - SILK Unicorn PLA Filament 1.75mm, 1kg

Bring an ultra-lustrous, magical spectrum straight to your 3D printer. Cookiecad SILK Unicorn PLA delivers an enchanting multi-color aesthetic wrapped in a high-sheen, metallic-like finish. This premium specialty spool cycles gracefully through three whimsical fantasy tones—pastel pink, soft violet purple, and celestial blue—before transitioning smoothly back to pink, bathing your finished models in a deep, silky luster that catches the light from every angle.

Master Your Silk Unicorn Gradients

Because the color shift occurs gradually across the length of the strand, you can use your slicing setup to control exactly how this magical spectrum reveals itself on your models:

• Small Objects: Will print in a single, rich shimmering silk tone—allowing you to harvest completely different looking colored parts out of different sections of the exact same roll.
• Large Objects: Will showcase a beautiful, seamless color cycle transitioning elegantly through the pink, purple, and blue spectrum.
• Pro-Tip for Dynamic Fades: Want to capture the full Unicorn gradient on smaller decorative items? Try printing multiple models simultaneously on your build plate, scaling up your object size, or increasing your infill density to pull more filament through the nozzle within a single layer height.

The High-Shine Silk Advantage

• Brilliant Liquid Finish: Formulated with specialized elastomers that give prints an upscale, hyper-glossy satin sheen that acts like a mirror to break up surface light reflections.
• Flawless Layer Masking: The extreme light reflectivity of the silk matrix masterfully camouflages standard layer lines and minor print artifacts right off the bed without tedious post-process sanding.
• Aesthetic Applications: Because silk additives give the material a brilliant luster, they make the final part slightly more delicate than classic rigid PLA. This spool is highly optimized for premium display models, cosplay props, vases, jewelry dishes, and whimsical figurines (not recommended for structural components or cookie cutters).

General Printing & Optimization Guidelines

• Nozzle/Extruder Temperature: 200°C – 225°C (Printing slightly hotter than standard PLA is recommended for silk formulas, as it expands the polymer to maximize the brilliant metallic luster).
• Heated Bed Temperature: 50°C – 60°C
• Part Cooling Fan: ON / High Speed (Crucial for locking down crisp overhang paths and maintaining sharp geometric edges).