Cookiecad - Pink Ombré Dual-Shade Gradient PLA Filament (1.75mm, 1kg)

Can't decide on the perfect shade of pink for your next creation? Enjoy the best of both worlds with a beautifully shifting pink spectrum. Cookiecad Pink Ombré PLA is a premium specialty transition filament that features two distinct, complementary shades of pink wound onto a single spool. Engineered for creators who are completely obsessed with pink, this premium material features high-reflectivity additives that cure to a spectacular, wet-look glossy finish right off the print bed.

Master Your Pink Ombré Gradients

Because the color shift occurs gradually across the length of the strand, you can use your slicing configuration to control exactly how this elegant pink spectrum reveals itself on your models:

• Small Objects: Will print in a single, rich glossy pink tone—allowing you to harvest completely different looking colored parts out of different sections of the exact same roll.
• Large Objects: Will showcase a beautiful, seamless ombre cycle transitioning elegantly back and forth between light and dark pink tones.
• Pro-Tip for Dynamic Fades: Want to capture the full pink transition on smaller decorative items? Try printing multiple models simultaneously on your build plate, scaling up your object size, or increasing your infill density to pull more filament through the nozzle within a single layer height.

Why Choose Cookiecad PLA?

• Flawless Desktop Reliability: Retains the legendary ease of use that makes PLA the global standard—offering exceptionally low thermal shrinkage, zero corner warping, and excellent dimensional uniformity.
• High-Gloss Surface Finish: Features a high-sheen, wet-look glossy base that accentuates crisp geometries, dramatic curves, and organic figurines right off the bed, helping to naturally mask layer lines.
• Universal Hardware Harmony: Prints cleanly on standard brass nozzles and open-air or enclosed desktop 3D printer configurations without requiring specialized, high-wear hardened components.

General Printing & Optimization Guidelines

• Nozzle/Extruder Temperature: 190°C – 220°C (Adjusting within this spectrum allows you to balance rapid extrusion with maximum high-gloss reflectivity; printing slightly hotter often intensifies the glossy shine).
• Heated Bed Temperature: 50°C – 60°C (Can also be deployed on unheated build surfaces treated with clean blue painter's tape or a premium print adhesive).
• Part Cooling Fan: ON / High Speed (Highly recommended to ensure sharp overhang paths, clean bridging stability, and immaculate top layer fills).

Obsessed with pink variations? Mix up your creative workflow by checking out our delicate, pastel Pale Pink or our boldly vibrant Hot Pink!