Ambrosia Filament's line of PLA is part of our Low Calorie line of filament: no additives, just butter-smooth printing.
Feed your Printer the Filament of the Gods.
Derived from 100% Virgin Grade-A Non-Toxic pellets. Manufactured to a tighter than standard tolerance (+/- 0.03mm), you'll experience consistent extrusion throughout the spool.
PLA is the material of choice for most hobbyist makers. A bio-degradable plastic derived from renewable resources (such as corn), it is one of the easiest materials to print with. It features a relatively low melting point and can be printed without a heated bed. Printing with PLA is typically odorless or emits a "sweet" aroma, making it a safer option for enclosed spaces.
Packaging: Cardboard box, filament wound on a cardboard spool, vacuum sealed with desiccant.
Material: 100% Virgin (Grade-A) non-toxic pellets
Diameter: 1.75mm (+/- 0.03mm)
Net Weight: 1KG
Note: The glue holding the filament spool together is rated for 70°C (158°F). If using a filament dryer exceeding this temperature, we recommend using a spool clip or ring.
PEI, Glass, Painters Tape, or Buildtak [Smooth PEI]
Cooling Fan
50-100% (varies by printer)
Environmental Temp
15-40°C [25°C]
Soluble Support
PVA, BVOH
Technical Specifications
Physical Properties
Methodology
Values
Density
ISO1183
1.25-1.26 g/cm³
Melt Flow Rate (250°C/2.16KG)
ISO 1133
4-8 g/10min
Mechanical Properties
Methodology
Values
Tensile Strength
ISO 527
45-49 Mpa
Elongation at Break
ISO 527
13-15.5%
Flexural Modulus
ISO 527
1000-1100 Mpa
Flexural Strength
ISO 178
69-75 Mpa
Impact Strength
ISO 180
4.5-5 KJ/m²
Thermal Properties
Methodology
Values
HDT @ 0.455 MPa
ISO 75
53°C
Continuous Use Temp
IEC 60216
50°C
Filament can absorb moisture easily. Keep sealed in an airtight container with desiccant when not in use.
Disclaimer: Filaments may emit Volatile Organic Compounds (VOCs) when heated. Always print in a well-ventilated area. Technical data is provided to the best of our knowledge, but users should determine suitability for their specific applications. Ambrosia Filament assumes no liability for the use of this information.
