Ambrosia Filament's PETG is the perfect "graduating" material for makers moving beyond PLA. Derived from 100% Virgin Grade-A pellets, PETG offers high impact strength, low haze (ideal for translucent prints), and superior heat resistance compared to standard PLA.
Feed your Printer the Filament of the Gods.
Manufactured to a tight tolerance of +/- 0.03mm, you’ll experience consistent extrusion throughout the entire spool. PETG is incredibly versatile, commonly used for functional parts that require more durability than PLA but more ease-of-use than ABS.
-
Packaging: Arrives in a cardboard box, wound on a cardboard spool, vacuum sealed with desiccant.
-
Material: 100% Virgin (Grade-A) non-toxic pellets.
-
Diameter: 1.75mm (+/- 0.03mm).
-
Net Weight: 1KG.
Explore the Ambrosia Collection:
ASA, ASA-CF, ASA Sparkle, ASA Dolos, ABS+, PETG, PLA, PLA Dolos, PC-ABS, PC-CF, TPU, ABS Matte, ASA-GF, PLA-SILK, PHA.
Recommended Print Settings
| Attribute |
Recommended Value [Optimal] |
| Extruder Temperature |
225-260°C [250°C] |
| Heated Bed |
65-80°C [80°C] |
| Build Surface |
Textured PEI, Glass, or Buildtak |
| Cooling Fan |
0-70% (varies by geometry) |
| Environmental Temp |
15-50°C [30°C] |
Technical Specifications (PETG)
| Physical Properties |
Methodology |
Values |
| Density |
ISO1183 |
1.27-1.28 g/cm³ |
| Melt Flow Rate |
ISO 1133 |
8-12 g/10min |
| Mechanical Properties |
| Tensile Strength |
ISO 527 |
41-45 Mpa |
| Flexural Strength |
ISO 178 |
64-66 Mpa |
| Impact Strength |
ISO 180 |
5-6 KJ/m² |
| HDT @ 0.455 MPa |
ISO 75 |
68°C |
Spool Care: The spool glue is rated for 70°C. For drying or high-temp use, we recommend a printed spool ring. PETG is hygroscopic; keep sealed with desiccant when not in use.
Disclaimer: 3D printing may emit Volatile Organic Compounds (VOCs). Print in a well-ventilated area. Technical data is provided to the best of our knowledge, but users are responsible for determining suitability for their specific applications.
