AMBROSIA - ASA Galactic Filament of the Gods (Glitter / Sparkle) - 1KG
AMBROSIA - ASA Galactic Filament of the Gods (Glitter / Sparkle) - 1KG
Ambrosia Filament's line of ASA Galactic (Sparkle) is derived from 100% Virgin Grade-A Non-Toxic pellets. This filament is infused with high-quality glitter, resulting in a stunning sparkle effect for your prints. Manufactured to a tight tolerance of +/- 0.03mm, it ensures consistent extrusion for professional results.
Feed your Printer the Filament of the Gods.
ASA is the superior successor to ABS, perfect for mechanical, functional, and decorative parts. It offers exceptional strength, impact resistance, and weatherability (including UV). While it prints with less warping than standard ABS, an enclosure is highly encouraged and a heated bed is required.
- Packaging: Eco-friendly cardboard box and spool, vacuum-sealed with desiccant.
- Material: 100% Virgin (Grade-A) non-toxic pellets.
- Diameter: 1.75mm (+/- 0.03mm).
- Net Weight: 1KG.
- Spool Weight: 130G.
Important Spool Care: The spool glue is rated for environments up to 70°C (158°F). If drying your filament or printing in an enclosure exceeding this temperature, we recommend using a printed spool ring or clip to maintain integrity.
Explore our other Ambrosia Filament lines:
ASA, ASA-CF, ASA Sparkle, ASA Dolos, ABS+, PETG, PLA, PLA Dolos, PC-ABS, PC-CF, TPU, ABS Matte, ASA-GF, PLA-SILK, PHA.
Recommended Print Settings
| Attribute | Accepted Range [Recommended] |
|---|---|
| Extruder Temperature | 230-260°C [250°C] |
| Heated Bed | 100-115°C [110°C] |
| Build Surface | PEI, Buildtak, or similar [Textured PEI] |
| Cooling Fan | 0-70% (varies by setup) |
| Environmental Temp | 40-120°C [45°C] |
| Soluble Support | HIPS |
Technical Specifications
| Property | Methodology | Values |
|---|---|---|
| Density | ISO1183 | 1.08-1.09 g/cm³ |
| Melt Flow Rate (250°C/2.16KG) | ISO 1133 | 20-25 g/10min |
| Mechanical & Thermal | ||
| Tensile Strength | ISO 527 | 42-45 Mpa |
| Flexural Modulus | ISO 527 | 1200-1400 Mpa |
| Impact Strength | ISO 180 | 19-20 KJ/m² |
| HDT @ 0.455 MPa | ISO 75 | 88°C |
Note: ASA is hygroscopic. Store in an airtight container with desiccant when not in use to ensure peak print quality.
Disclaimer: ASA may emit VOCs (styrene) during printing. Use only in well-ventilated areas with proper safety measures. Technical data is provided for informational purposes; suitability for specific applications is the responsibility of the user.
Share
