Released in late 2024, Ambrosia Filament's ABS line marks the rebirth of high-quality, unadulterated ABS. Unlike many "plus" variants, this filament contains no additional polymer additives that compromise material properties. The resin was specifically selected for its exceptional printability and superior surface finish.
Note: Black Matte ABS is Pantone 7C, resulting in a very dark, professional grey.
Feed your Printer the Filament of the Gods.
Derived from 100% Virgin Grade-A Non-Toxic pellets and manufactured to a tight tolerance of +/- 0.03mm, you will experience consistent extrusion throughout the spool. ABS is a top choice for industrial and engineering applications, offering a perfect balance of strength, durability, and heat resistance.
-
Packaging: Eco-friendly cardboard box and spool, vacuum-sealed with desiccant.
-
Material: 100% Virgin (Grade-A) non-toxic pellets.
-
Diameter: 1.75mm (+/- 0.03mm).
-
Net Weight: 1KG.
-
Spool Weight: ~130g.
Important Spool Care: The spool glue is rated for 70°C (158°F). If using a filament dryer or high-temp enclosure, we recommend using a printed spool ring or clip to maintain spool integrity.
Explore the Ambrosia Collection:
ASA, ASA-CF, ASA Sparkle, ASA Dolos, ABS+, PETG, PLA, PLA Dolos, PC-ABS, PC-CF, TPU, ABS Matte, ASA-GF, PLA-SILK, PHA.
Recommended Print Settings
| Attribute |
Recommended Value [Optimal] |
| Extruder Temperature |
230-265°C [245°C] |
| Heated Bed |
75-115°C [110°C] |
| Build Surface |
Textured PEI or similar |
| Cooling Fan |
0-70% (varies by setup) |
| Environmental Temp |
30-100°C [40°C] |
| Soluble Support |
HIPS |
Technical Specifications
| Physical Properties |
Methodology |
Values |
| Density |
ISO1183 |
1.03g/cm³ |
| Melt Flow Rate |
ISO 1133 |
2-4 g/10min |
| Mechanical & Thermal |
| Tensile Strength |
ISO 527 |
39 Mpa |
| Impact Strength |
ISO 180 |
29 KJ/m² |
| HDT @ 1.8 MPa |
ISO 75 |
88°C* |
*Note: HDT was measured at 1.8 MPa; expected HDT at standard 0.455 MPa stress levels is significantly higher (est. 98°C).
ABS is hygroscopic. Keep sealed in an airtight container with desiccant when not in use to ensure peak print quality. An enclosure is highly recommended.
Disclaimer: ABS prints emit Volatile Organic Compounds (VOCs) and styrene. Use only in well-ventilated areas with proper filtration/respiration. Technical data is provided to the best of our knowledge; users are responsible for determining suitability.
