3DXTech 3DXSTAT ESD-PETG Filament - 1.75mm (750g Spool)
3DXTech 3DXSTAT ESD-PETG Filament - 1.75mm (750g Spool)
Protect critical electronic components and sensitive assemblies with 3DXTech 3DXSTAT™ ESD-PETG Filament. Engineered using state-of-the-art multi-wall carbon nanotube (CNT) technology, this advanced compound delivers reliable electrostatic discharge (ESD) protection with a target surface resistance of 104 to 109 Ohm. Designed as a superior alternative to Zortrax Z-ESD, it provides high-precision ESD control for electronic manufacturing, cleanroom fixtures, and protective enclosures.
Base-formulated with industrial PETG, 3DXSTAT™ offers superior chemical resistance and ductility compared to standard ABS, as well as three times lower moisture absorption and near-isotropic shrinkage. Manufactured in Grand Rapids, Michigan, this high-performance filament combines ease of printing with low odor, making it ideal for structural engineering and desktop electronics assembly.
Key Features
- Target Surface Resistance (104 - 109 Ohm): Precision ESD protection powered by advanced multi-wall carbon nanotube (CNT) compounding.
- Superior Ductility & Chemical Resistance: Outperforms ABS in impact strength and solvent resistance with minimal moisture absorption.
- Low Shrinkage & High Stability: Amorphous structure ensures low, near-isotropic shrinkage for high dimensional accuracy across complex geometries.
- Low Odor Extrusion: Emits very little odor during printing, making it suitable for open-air lab and office environments.
- Made in the USA: Precision manufactured in 3DXTech's state-of-the-art 68,000 sq. ft. facility in Grand Rapids, Michigan.
Safety & Handling Notice
Important Health & Safety Warning: Per CDC/NIOSH guidelines, Carbon Nanotubes (CNT) contained in this compound pose potential health hazards, particularly respiratory irritation and inflammation at low-mass doses. To ensure safe operation, utilize proper HEPA/carbon air filtration systems or appropriate respirators when printing, sanding, or post-processing this material.
Recommended Print Settings
| Parameter | Recommended Value |
|---|---|
| Extruder Temperature | 230°C – 260°C |
| Heated Bed Temperature | 60°C – 90°C |
| Heated Chamber Required? | Not Required |
| Nozzle / Layer Height | No special concerns (Standard brass or hardened nozzles) |
| Drying Specifications | 65°C for 4 hours prior to printing |
Technical Specifications
- Brand: 3DXTech
- Series: 3DXSTAT™
- Base Material: PETG with Multi-Wall Carbon Nanotubes (CNT)
- Filament Diameter: 1.75mm
- Spool Weight: 750g (1.65 lbs)
- Country of Origin: USA
Share
Product added to Cart!
3DXTech 3DXSTAT ESD-PETG Filament - 1.75mm (750g Spool)