{"product_id":"xtr-magnetic-base-355x355-sovol-sv08-voron-350-v2","title":"XTR Magnetic Base - 355 x 355 mm","description":"\u003cp\u003eUpgrade your 3D printer's hold down force with the \u003cstrong\u003eWham Bam XTR Magnetic Base\u003c\/strong\u003e (355 x 355 mm). Featuring an extra-thick 2 mm magnetic layer, the eXTReme (XTR) line is engineered specifically for prosumer and industrial-grade FDM machines to provide maximum stiffness and resist the intense peeling and warping forces generated by high-shrinkage engineering filaments.\u003c\/p\u003e\n\n\u003cp\u003ePre-backed with high-temperature 3M adhesive rated up to 150°C, this magnetic base ensures your build plate remains perfectly aligned and firmly secured throughout long, demanding print jobs.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 355 mm x 355 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 2.0 mm heavy-duty magnetic sheet (XTR grade)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThermal Limit:\u003c\/strong\u003e High-temperature 3M adhesive rated for continuous use up to 150°C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e 1x XTR Magnetic Base with pre-applied 3M adhesive backing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePrinter Compatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDirect Fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSovol SV08\u003c\/li\u003e\n  \u003cli\u003eVORON Design 350 V2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMay Fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSovol SV03\u003c\/li\u003e\n  \u003cli\u003eZortrax M300\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation, Maintenance \u0026amp; Best Practices\u003c\/h3\u003e\n\n\u003ch4\u003eInstallation Steps\u003c\/h4\u003e\n\u003col\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClean the Heated Bed:\u003c\/strong\u003e Remove any previous magnetic sticker or adhesive residue. Wipe down the bare bed with Isopropyl Alcohol (IPA) and a fresh paper towel.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface Preparation:\u003c\/strong\u003e Scuff the metal print bed uniformly using 220-grit sandpaper to remove surface contaminants and improve adhesion. If the bed is painted, lightly break through the paint layer.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinal Wipe:\u003c\/strong\u003e Clean thoroughly with \u0026gt;90% IPA and fresh paper towels until no residue or dust remains on the paper towel. Allow the surface to dry completely.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication \u0026amp; Curing:\u003c\/strong\u003e Carefully align and apply the magnetic sheet, pressing firmly across the entire surface to eliminate air bubbles. \u003cstrong\u003eAllow the 3M adhesive to cure for a full 72 hours before heating or printing.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch4\u003ePost-Installation Setup\u003c\/h4\u003e\n\u003cp\u003eOnce the adhesive curing period is complete, re-level your print bed (automatic or manual) and recalibrate your Z-offset to account for the added thickness. Refer to Wham Bam's \u003ca href=\"https:\/\/www.whambamsystems.com\/pages\/bed-leveling-help\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBed Leveling Guide\u003c\/a\u003e for step-by-step assistance.\u003c\/p\u003e\n\n\u003ch3\u003eDownloads \u0026amp; Resources\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/cults3d.com\/en\/3d-model\/tool\/build-plate-and-cap-holder\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTable Top \/ Wall Mount Flexi Plate Holder (STL)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/cults3d.com\/en\/3d-model\/tool\/tool-kit-holder-for-fdm-printers\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTool Holder (STL)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/cults3d.com\/en\/3d-model\/tool\/table-top-spool-holder\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eExternal Spool Holder (STL)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.whambamsystems.com\/pages\/fbs-kits-support-page\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWham Bam Support \u0026amp; Knowledge Base\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wham Bam Systems","offers":[{"title":"Default Title","offer_id":46271131418823,"sku":"355_355_MAG_3X","price":74.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/5320\/0583\/files\/SIZEDMagnet_Master_355x355XTR-Magnet.jpg?v=1773082158","url":"https:\/\/copier2go.com\/products\/xtr-magnetic-base-355x355-sovol-sv08-voron-350-v2","provider":"Copier2Go","version":"1.0","type":"link"}