{"product_id":"magnetic-base-315x310-ender-3-s1-plus-k1-max","title":"High-Temp Magnetic Base - 315 x 310 mm (Ender 3 S1 Plus, K1 Max, CR-10 Smart Pro)","description":"\u003cp\u003eUpgrade your 3D printer bed setup with the high-performance \u003cstrong\u003eWham Bam High-Temp Magnetic Base\u003c\/strong\u003e (315 x 310 mm). Formulated specifically to resist extreme bed temperatures for prolonged periods, this magnetic sheet provides exceptional holding force to ensure your flex plate stays securely aligned during printing.\u003c\/p\u003e\n\u003cp\u003eMeasuring 1 mm in thickness, this magnetic base comes pre-backed with high-temperature 3M adhesive for a strong, reliable bond directly to your heated bed.\u003c\/p\u003e\n\u003ch3\u003eKey Features \u0026amp; Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 315 mm x 310 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 1 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive:\u003c\/strong\u003e Pre-applied high-temperature 3M adhesive backing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Rating:\u003c\/strong\u003e Rated for continual use up to 150°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e 1x High-Temp Magnetic Base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinter Compatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDirect Fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCreality CR-10 Smart Pro\u003c\/li\u003e\n\u003cli\u003eCreality Ender 3 S1 Plus\u003c\/li\u003e\n\u003cli\u003eCreality Ender 3 V3 Plus\u003c\/li\u003e\n\u003cli\u003eCreality K1 Max\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation, Maintenance \u0026amp; Best Practices\u003c\/h3\u003e\n\u003cp\u003e\u003cem\u003eProper surface preparation and curing time are crucial to ensure a permanent bond.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003eStep-by-Step Installation\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the Heated Bed:\u003c\/strong\u003e Remove any previous magnet or adhesive residue completely using Isopropyl Alcohol (IPA) and a fresh paper towel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRough Up the Surface:\u003c\/strong\u003e Lightly sand the metal build surface using 220-grit sandpaper to create a uniform texture for optimal adhesion. If the surface is painted, attempt to partially break through the paint layer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinal Degreasing:\u003c\/strong\u003e Wipe down the surface multiple times with 90%+ Isopropyl Alcohol and clean paper towels until no dirt or residue appears on the towel. Avoid using shop rags or towels that contain oils.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply the Base:\u003c\/strong\u003e Ensure the bed is completely dry, then peel back the 3M liner and carefully align and press the magnetic base firmly onto the surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure Time:\u003c\/strong\u003e Allow the 3M adhesive to cure for a full \u003cstrong\u003e72 hours\u003c\/strong\u003e prior to heating or using the bed.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003ePost-Installation Bed Leveling\u003c\/h4\u003e\n\u003cp\u003eOnce installed, perform a fresh bed-leveling sequence (auto-leveling or manual) and adjust your Z-offset to ensure the ideal first-layer squish. For additional tips, refer to the \u003ca href=\"https:\/\/www.whambamsystems.com\/pages\/bed-leveling-help\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWham Bam Bed Leveling Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eDownloads \u0026amp; Resources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cults3d.com\/en\/3d-model\/tool\/build-plate-and-cap-holder\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eTable Top \/ Wall Mount Flexi Plate Holder (STL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cults3d.com\/en\/3d-model\/tool\/tool-kit-holder-for-fdm-printers\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eFDM Printer Tool Kit Holder (STL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cults3d.com\/en\/3d-model\/tool\/table-top-spool-holder\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eTable Top Spool Holder (STL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cults3d.com\/en\/3d-model\/gadget\/bas-relief-whammy-mascot-for-wham-bam\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWhammy - Wham Bam Mascot (STL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.youtube.com\/watch?v=_llO_QcPJRc\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eInstallation Video Guide\u003c\/a\u003e\u003ca href=\"https:\/\/www.whambamsystems.com\/pages\/fbs-kits-support-page\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wham Bam Systems","offers":[{"title":"Default Title","offer_id":46271131582663,"sku":"315_310_MAG","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/5320\/0583\/files\/SIZEDMagnet_Master_315x310-Magnet.jpg?v=1773082158","url":"https:\/\/copier2go.com\/products\/magnetic-base-315x310-ender-3-s1-plus-k1-max","provider":"Copier2Go","version":"1.0","type":"link"}