{"product_id":"flexi-plate-pex-creality-cr10s-pro-320x310","title":"Flexi Plate with PEX - Creality CR-10S Pro \/ Anycubic Kobra Plus (320 x 310 mm)","description":"\u003cp\u003eUpgrade your 3D printing build surface with the \u003cstrong\u003eWham Bam Flexi Plate with PEX\u003c\/strong\u003e, sized at 320 x 310 mm. Combining a high-adhesion PEX build layer with a flexible, rust-proof spring steel plate, this system ensures strong first-layer bonding during printing and smooth, hassle-free print removal once cooled.\u003c\/p\u003e\n\n\u003cp\u003eEngineered for long-lasting durability, this spring steel plate flexes easily to pop off complex models without damaging the print or build surface.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 320 mm (Y direction) x 310 mm (X direction, tab side)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlate Thickness:\u003c\/strong\u003e 0.4 mm spring steel core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuild Surface Thickness:\u003c\/strong\u003e 0.35 mm PEX layer\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor Compatibility:\u003c\/strong\u003e Eddy current mesh, optical, touch, inductive, capacitive, and Cartographer sensors\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e 1x Flexi Plate with pre-applied PEX Build Surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePrinter Compatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDirect Fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreality CR-10S Pro, CR-10S Pro V2, CR-10S Pro V3, CR-X, Ender 3 Max, Ender 3 Max Neo\u003c\/li\u003e\n  \u003cli\u003eAnycubic Kobra Plus\u003c\/li\u003e\n  \u003cli\u003eComgrow T300\u003c\/li\u003e\n  \u003cli\u003eFormbot Troodon 300\u003c\/li\u003e\n  \u003cli\u003egoofoo Nova\u003c\/li\u003e\n  \u003cli\u003eSovol SV06 Plus, SV07 Plus \u003cem\u003e(Requires removing the rear alignment screws or mounting the plate 5 mm forward)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eMay Fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAnycubic Mega X, Artillery X4 Plus S1 (no alignment holes), Creality CR-10 Smart, Kywoo Tycoon Max, Sovol SV04\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSetup, Maintenance \u0026amp; Best Practices\u003c\/h3\u003e\n\u003cp\u003e\u003cem\u003eNote: A magnetic base or bed clips are required to secure the Flexi Plate to your heated bed.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch4\u003eInitial Surface Preparation (PEX Prep)\u003c\/h4\u003e\n\u003cp\u003eBefore your first print, scuff the PEX surface in circular motions for 4–5 minutes using 000 steel wool or a red Composite Abrasive Pad (CAP 7447) until you achieve an even, satin-matte finish with minimal reflection. Clean thoroughly using \u0026gt;90% Isopropyl Alcohol (IPA) and a fresh paper towel (do not use rags, microfiber, or pre-packaged wipes).\u003c\/p\u003e\n\n\u003ch4\u003eBed Leveling \u0026amp; Filament Setup\u003c\/h4\u003e\n\u003cp\u003eRe-run your printer's automatic bed leveling routine or manually set your Z-offset after installation to achieve the proper first-layer squish. For initial layers, set hot-end temperatures toward the lower end of the filament manufacturer's recommended range. Use a glue stick as a barrier layer when printing materials like PETG or ASA to prevent permanent bonding to the surface.\u003c\/p\u003e\n\n\u003ch4\u003ePart Removal \u0026amp; Care\u003c\/h4\u003e\n\u003cp\u003eAlways wait for the build plate to cool completely before removing parts. Flex the plate gently to release prints—never force prints off while warm. Between prints, scuff the surface for about 10 seconds and wipe with IPA to clear filament residue.\u003c\/p\u003e\n\n\u003ch3\u003eVideo Guide \u0026amp; Resources\u003c\/h3\u003e\n\u003cp\u003eWatch the video below for a complete guide on preparing, maintaining, and maximizing the life of your PEX build surface:\u003c\/p\u003e\n\n\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; margin-bottom: 1em;\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/TrI3Zem9U1o?start=257\" style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; border: 0;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003eDownloads:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/cults3d.com\/en\/3d-model\/tool\/build-plate-and-cap-holder\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTable Top \/ Wall Mount Flexi Plate Holder (STL)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/cults3d.com\/en\/3d-model\/tool\/tool-kit-holder-for-fdm-printers\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTool Holder (STL)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/cults3d.com\/en\/3d-model\/tool\/table-top-spool-holder\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eExternal Spool Holder (STL)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/cults3d.com\/en\/3d-model\/gadget\/bas-relief-whammy-mascot-for-wham-bam\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWhammy Mascot Test Print (STL)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wham Bam Systems","offers":[{"title":"Default Title","offer_id":46271132664007,"sku":"PI_320_310_PEX_3","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/5320\/0583\/files\/SIZEDPIPEX_Master_320x310-PIPEX.jpg?v=1773082159","url":"https:\/\/copier2go.com\/products\/flexi-plate-pex-creality-cr10s-pro-320x310","provider":"Copier2Go","version":"1.0","type":"link"}